New Site For Robotics And Electronics Supplies

-
I was browser my Google reader feed and a great site popped up. I've checked it out and once I get my work bench set up and get back to my robot; I'll definitely be ordering some things from here. I wanted to spread the word about the site: http://www.inmojo.com/

They have lots of RFID, Robotics and just Arduino stuff that I think would be cool to play with.

I hope to get a full post up soon.

Comments

Post a Comment

Popular posts from this blog

Resuming My Robot Work With Bonus 3D Printer Project

-
Image
Well after a long break of working on the house; this blog will be returning to a primarily robot programming focus. My work on the house is shared elsewhere... So; I've resumed work on my robot and added a second Arduino to my arsenal; this way I can prototype ideas without disassembling the robot. I have used it to go through the tutorial for the TFT screen: The new Arduino is an UNO; they come in much more sophisticated packaging than their predecessor: That is a sticker sheet on the right and a EULA in the middle. The first nice thing to notice about the UNO is it auto switches the power source. You can see this difference and other slight changes in the comparison here: So; I will post about the robot again when line following can be demonstrated and the code is ready to share. I hope to share two versions (with and without TFT info printing). With that; the other exciting news is that I am building a 3D printer; which I will document here and share my proble...
Read more

Arduino Robot 2 - Wandering Tank

-
Image
My second robot was a bit more complex and ended up taking twice as long to build as originally intended. The budget changed, the designed changed, and my understanding of Robotics in general changed. The second robot is an attempt to make an obstacle avoidance robot that isn't overly simple. I will be outlining the goals, budget, build and code for Wandering Tank. The goals for Wandering Tank were simple: Should be able to scan an area in front of itself. Should be able to avoid not only walls, but obstacles. Avoid random decision making; the robot should use information when avoiding. Wandering tank meets these goals, and also looks pretty cool doing it. The code for the robot will show how the third goal is met and the other two will be obvious in the video. The budget for Wandering Tank was quite cheap. Since I started with Robot 1, the only additional cost for Wandering was the sensor and the servo. Robot 1 ($98.00) Sensor - Digital Distance Sensor 10cm $6.95 + $2.00...
Read more

Quick Post About Hexy

-
Image
Hello, just a quick post about Hexy the robot. I was recalibrating the printer after finishing up the rebuild and wanted to do some printing. Since I was curious about the sizing of Hexy and also my ability to print parts for it; I decided to grab the STL files and get printing. There was trouble; not all of the stl files were ready, some of them needed to be run through http://cloud.netfabb.com/ first. It took me a while to figure this out; but once I found it everything went smoothly. You may be curious; so here are some leg pieces for Hexy; printed in blue PLA. That's all for now. I'm prepping a full post on the rebuild reprap; my robot progress, and another project that is coming along very nicely.
Read more